Namrata Rami – RF Engineer                                namratarami85@gmail.com |714.253.8130 RF Engineer with experience in scripting and optimization, project development, performance, and support. Experience in ATP testing and data processing with different tool. Optimization experience in CDMA, LTE, and UMTS using different client tools. Looking to couple experience in large enterprise wide programs and projects with organizational transformation, process re-design, and driving change for more effective and efficient as RF Engineer.

TECHNICAL SKILLS:

·                          Ericsson Tools: ERTT (Ericsson RF Tracking Tool), TRAMS, CANA, NEWTUNE, ENIQ, NEAT Tool, NDS Tool, SANE

·                          Sprint Tool: Falcon

·                          RF Tools – Nortel CDMA Access Configuration and Provisioning Application (CACP), Common Provisioning System (CPS), MapInfo, Google Earth, RF Cockpit, WPS, RF Sync Qualcomm Extensible Diagnostic Monitor (QXDM), Delorme Street Atlas, TEMS Investigation 14

·                          Data Processing Tools: Actix, WindCatcher, EDAT

·                          Operating Systems: Windows 98, 2000, XP, Vista, Windows 7, Mac, Unix, MSDOS

·                          Network Protocol: FTP, LAN, WAN, WiFi, Wireshark analyzer, network troubleshooting

·                          Languages: C, C++.

·                          Software:  MS Office (Access, Word, Excel, Power Point, Outlook), Adobe Applications, Matlab.

·                          Design Tools: OrCAD, CADSTAR, EAGLE, AUTOCAD

·                          Architecture: Microprocessor and Microcontroller Family

·                          Programming: Microprocessor and Microcontroller

 

EDUCATION

Masters of Science, Electrical Engineering- Emphasis on Telecommunication                May-2012

California State University, Fullerton, CA

Bachelors of Engineering, Electronics and Communication        July-2009

South Gujarat University, Gujarat, INDIA

 

PROFESSIONAL EXPERIENCE:

 

MobileNet Services, Inc.Irvine, CA          August 2013 – Present RF Engineer

 

           I.         Verizon Carrier harvesting (Ericsson) for So-Cal Markets           [June 2015 – Present]

Responsibilities:

·   Creating a master tracker with all the source and destination sites along with the required licenses and site configuration

·   Creating an OM report and comparing with Baseline report to check the site performance

·   Session files and EMS audit using SANE

·   Scripting for BTS and DOM using CACP and CPS Tool

·   Licenses count required and removal track

·   Customer and NIC team support

 

 

        II.         Ericsson Sprint Network Vision – CPM/ Break Fix & 1900/800 Band RF Optimization for Miami/South West Florida/Gulf Coast/New Orleans/Jacksonville and the Panhandle Market                                                 [December 2014 – June-2015]                                                                                                

Responsibilities:

·   Performance check and optimization on all CPM/ERC tickets for all markets

·   CMC and CSMS ticket request to make market level or site level parameter or any performance related changes.

·   ERTT and TRAMS Ticket creation to keep all high runner sites at same page for Sprint and Ericsson Teammates

·   Providing performance check and Optimization on 1900 and 800 Band daily top offender Sites

·   Site audit to check configuration and all parameters using Nortel CDMA Access Configuration and Provisioning Application (CACP).

·   Providing data fill recommendations on sites showing incorrect configurations after cut such as neighbor list updates, power adjustments, hard hand off parameters, and essential golden parameters.

·   Report management, call block, call drop, call attempt and call failure on sites to find issues using RF COCKPIT/ RF Sync for CDMA and ENIQ for LTE performance

·   Generate XMU and RBS using Neat and OSS Reports for migrated sites to find hardware alarms.

·   Check for correct PCI, swapped sectors, Newton plots, antenna electrical and mechanical tilt factor and transmit power validation.

·   Assist NIC in providing sites showing hardware alarms in order to get issues resolved

 

     III.         Sprint ATP Data Processing and Optimization (ALU) for Multiple Markets

                                                                                                     [October 2014 – December 2014]

           Responsibilities:

·   Data Processing for Pre-Launch Sites using eDAT (x64)

·   Sector level stationary tests to perform DL, UL, Setup and Ping Testing

·   Checking intra site inter sector Handovers using clockwise and counter-clockwise round around site using eDAT (x64)

·   Creating report for all data driven along with all the Site information

·   Coordinating with Drive Testers while testing by checking the data has been provided

·   Sector swap and Azimuth rotation issues

·   Troubleshooting with Drive Testers

·   Drive route for design for clusters using MapInfo and Street atlas

 

     IV.         AT&T LTE /UMTS Data Processing and Optimization (ALU) for PNW Market

                                                                                                          [August 2014 – October 2014]

            Responsibilities:

·   Preparing whole Pre and Post Processing plan for individual Site or Cluster

·   Creating Polygon and Drive plan for individual/ Cluster Site using MapInfo tool

·   Making Exit Routes for Inter, Intra and IRAT for Site

·   Creating Neighbor List using WPS tool

·   Data Processing and analyzing with Actix tool

·   Generating ANOVA Report for KPI Values and other parameter audit

·   Final report for whole Pre and Post Data Processing for SSV or Cluster Site

·   Coordinating with Drive Tester on Drive Plan and Data Processing

·   Optimizing Sector/Site for better coverage

 

 

 

 

        V.         Sprint Network Vision (Ericsson) – RF Optimization for Atlanta/Alabama Market

                                                                                                             [March 2014 – August 2014]

           Responsibilities:

·   Provided Optimization on daily Top Offender sites

·   Troubleshooting with Field Engineer and NIC on sites showing issues

·   Site audited to check configuration and all parameters using Nortel CDMA Access Configuration and Provisioning Application (CACP).

·   Provided data fill recommendations on sites showing incorrect configurations after cut such as neighbor list updates, power adjustments, hard hand off parameters, and essential golden parameters.

·   Report management, call block, call drop, call attempt and call failure on sites to find issues using RF COCKPIT.

·   Generated XMU and RBS Neat Reports for migrated sites to find hardware alarms.

·   Checked for correct PCI, swapped sectors, Newton plots, antenna electrical and mechanical tilt factor and transmit power validation.

·   Assisted NIC in providing sites showing hardware alarms in order to get issues resolved.

 

     VI.         Sprint Network Vision Stationary Testing (ALU) – Los Angeles Market                                                        

                                                                                                           [February 2014- March 2014]

          Responsibilities:

·   Stationary Testing for Sprint’s LTE network for Southern California markets.

·   Sector level stationary tests to perform DL, UL, Setup and Ping Testing

·   Checked intra site inter sector Handovers using clockwise and counter-clockwise round around site drive

·   Performed site baseline drive tests using QxDM and Wireshark Network Protocol.

 

    VII.       Sprint Network Vision (Ericsson) – RF/Cluster Optimization for Kansas Market

                                                                                                     [September 2013 – January 2014]

           Responsibilities:

·   Cluster Optimization.

·   Provided RF engineering support during the migration of Nortel Legacy BTS equipment to Ericsson RBS equipment.

·   Troubleshoot with Field Engineer and NIC on sites showing issues after being converted to RBS equipment.

·   Site audited to check configuration and all parameters using Nortel CDMA Access Configuration and Provisioning Application (CACP).

·   Provided data fill recommendations on sites showing incorrect configurations after cut such as neighbor list updates, power adjustments, hard hand off parameters, and essential golden parameters.

·   Report management, call block, call drop, call attempt and call failure on sites to find issues using RF COCKPIT.

·   Generated XMU and RBS Neat Reports for migrated sites to find hardware alarms.

·   Checked for correct PCI, swapped sectors, antenna electrical and mechanical tilt factor and transmit power validation.

·   Assisted NIC in providing sites showing hardware alarms in order to get issues resolved.

 

 

 

 

 

 

 

    VIII.    Sprint Network Vision (Ericsson) - Scripting               [August 2013 - September 2013]

           Responsibilities:

·   SNV project using

Ø      CACP (CDMA Access Configuration and Provisioning application) versions 18.04p50 & 18.06.

Ø      CPS (Common Provisioning System) for EVDO Global System Rel1.1 V1.1.0.

Ø      CPS (Common Provisioning System) for 1xEV-DO V10.1.

·   Generated scripts required to add and configure the RF parameters for each sites.

·   Generated neighbor list scripts for surrounding sites.

·   Worked closely with the Network Integration (NI) team to provide troubleshooting support during the conversion.

 

Myers Power Products, Inc.Ontario, CA October 2012 – August 2013 Project Engineer

 

Responsibilities:

·                          Worked on Southern California Edition PEBBLY BEACH 15KV Switchgear project.

·                          Medium voltage Switchgears designing for LA Glendale water Plant Project.

·                          Interpretation and direct dealing with customer and vendors for project related topics.

·                          Electrical Drawing using AUTOCAD.

·                          Worked on single line and three-line diagram.

·                          Analyzed and interpreted with wiring diagram and bill of materials.

·                          Documentation using MS tools.

 

Pacific Power Products, Inc.Santa Fe Springs, CA       July 2012 – October 2012

Project Engineer

 

Responsibilities:

·                          Electrical Drawing using AUTOCAD for medium voltage and low voltage switchgear

·                          Customer management related to requirements

·                          Worked on single line and three-line diagram.

·                          Analyzed and interpreted with wiring diagram and bill of materials.

·                          Documentation using MS tools.

 

Maharshi Electronics.Ahmadabad, Gujarat-INDIA                        July 2008 – May 2010

Electronics Design Engineer

 

Responsibilities:

·                          Electronics designing using AUTOCAD and CADSTAR for small and medium requirement projects from ISRO (Indian Institute of Science and Research Organization)

·                          PCB layout and designing

·                          Soldering and testing for all project devices

·                          Customer management related to requirements 

·                          Analyzed and interpreted with wiring diagram and bill of materials

·                          Documentation using MS tools.